箴duct Information

High performance laminated copper termite shield provides superior protection against termites and other insects.

Extended Description

-YorkShield 106 TS™is a copper termite barrier solution, made of a single sheet of 2 oz. copper and a tough polymer layer, laminated with 100% rubber adhesive. -Install YorkShield 106 TS between the foundation and the sill plate with the copper side up. -Cut pieces as long as possible to minimize joints. -The edge of flashing should extend approximately 2" beyond the edge of the foundation and turned down at a 45° angle. -Lap joints 6" to ensure there are no gaps that could enable termite access. -The foundation and sill surfaces should be as smooth as is practical to avoid puncturing the barrier during installation. -It is recommended that all penetrations and laps are sealed with mastic or caulk, as termites require as little as 1/64" to gain access.

Additional Warehouses